Griffin Beakers

Griffin Beakers

Product and ordering information for Griffin Beakers. Available in a variety of plastics to fit your application: ETFE, PMP or PP.  Meets the requirements of ISO 7056.

Catalog #: N/A Category:
   

Description

These Griffin beakers are available in a variety of plastics to fit your application. ETFE (ethylene tetrafluoroethylene) provides high chemical resistance and very high thermal stability (-100 to +150°C). PMP (polymethylpentene) provides glass-like clarity, while PP (polypropylene) is highly transparent and well-suited for general purpose use. Meets the requirements of ISO 7056 (except V110204-V111004). To preserve markings on products with colored overprinting(cat. no. V605081-V617081, V60503-V61703, V110204-V111004), cleaning at no higher than 60°C is recommended. For autoclaving, the design with raised graduations (cat. no. V606941-V617941, V60695-V61795) is recommended.

Product No. & Specs

Griffin Beakers, PP

  Volume
   mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.    
  25
5
50
38
12
V606941    
  50
10
60
47
12
V607941    
  100
10
70
55
12
V608941    
  150*
20
80
66
12
V609941    
  250
25
95
77
6
V610941    
  400*
50
111.5
87
6
V611941    
  500
50
117.5
94
6
V618941    
  600*
50
126.5
100
6
V612941    
  1000
100
147
120
6
V614941    
  2000
200
187
149
6
V615941    
  3000
250
212
170
4
V616941    
  5000
500
247
203
4
V617941    
* Variant in addition to ISO 7056
• Molded graduations for durability
• Food-safe according to EC Directive 10/2011


Griffin Beakers, PP

  Volume
   mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.    
  10*
2
36
30
12
V605081**
  25
5
50
38
12
V606081**
  50
10
60
47
12
V607081**
  100
10
70
55
12
V608081    
  150*
20
80
66
12
V609081    
  250
25
95
77
6
V610081    
  400*
50
111.5
  87
6
V611081    
  500
50
117.5
94
6
V618081    
  600*
50
126.5
100
6
V612081    
  1000
100
147
120
6
V614081    
  2000
200
187
149
6
V615081    
  3000
250
212
170
4
V616081    
  5000
500
247
203
4
V617081    
* Variant in addition to ISO 7056
• Molded graduations with blue screened overprint for legibility (** Blue printed scale, not molded graduations)
• Food-safe according to EC Directive No. 10/2011


Griffin Beakers, PMP

  Volume
   mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.     
  25
5
50
38
12
V60695     
  50
10
60
47
12
V60795     
  100
10
70
55
12
V60895     
  150*
20
80
66
12
V60995     
  250
25
95
77
6
V61095     
  400*
50
111.5
87
6
V61195     
  500
50
117.5
94
6
V61895     
  600*
50
126.5
100
6
V61295     
  1000
100
147
120
6
V61495     
  2000
200
187
149
6
V61595     
  3000
250
212
170
4
V61695     
  5000
500
247
203
4
V61795     
* Variant in addition to ISO 7056
• Molded graduations for durability


Griffin Beakers, PMP

  Volume
   mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.     
  10*
2
36
30
12
V60503     
  25
5
50
38
12
V60603     
  50
10
60
47
12
V60703     
  100
10
70
55
12
V60903     
  150*
20
80
66
12
V60903     
  250
25
95
77
6
V61003     
  400*
50
111.5
87
6
V61103     
  500
50
117.5
94
6
V61803     
  600*
50
126.5
100
6
V61203     
  1000
100
147
120
6
V61403     
  2000
200
187
149
6
V61503     
  3000
250
212
170
4
V61603     
  5000
500
247
203
4
V61703     
* Variant in addition to ISO 7056
• Easily readable, printed red scale; not raised.


Griffin Beakers, ETFE

  Volume
   mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.    
  25
5
50
32
1
V110204    
  50
10
59
39
1
V110304    
  100
20
72
50
1
V110404    
  250
50
96
67
1
V110604    
  400
50
109
77
1
V110704    
  500
100
122
88
1
V110904    
  600
100
125
91
1
V110804    
  1000
100
143
105
1
V111004    
• Beakers are translucent with black graduations for legibility

FAQs

Are the graduations on your volumetric plasticware molded on the inside, outside, or simply screen printed?

None of the graduations are molded on the interior. They would be very difficult to mold in that way, and would interfere with the accuracy. Exterior molding also allows for a better grip on the item. However, it does differ by product, specifically:

  • Graduated cylinders: All models have molded graduations. Some have screened overprint.
  • Volumetric flasks: All models have a scored graduation, with coloring added.
  • Erlenmeyer flasks: All models have screen printed graduations.
  • Griffin Beakers: Most models have molded graduations (with the exception cat. no. V110204-V111004, ETFE Griffin beakers, and some small volume sizes). Some have screened overprint.
  • Graduated pitchers: All models, with the exception of the nesting models, have molded graduations. Some have screened overprint. Nesting models have printed graduations.

How should I clean my volumetric plasticware?

Polyolefins, such as PP and PMP, as well as fluoroplastics (ETFE), have water-repellent surfaces that are very durable and easy to clean. For cleaning, depending on the level of contamination, commercially available neutral or alkaline detergents (i.e. Mucasol) can be used. Please note that no scrubbing agents or scouring pads should be used for labware made from plastics.
Plastic labware can be cleaned and dried in a laboratory diswasher, noting the temperature limits of the individual products. Due to their light weight, securing the labware with washing nets is recommended; and plastic-coated wire baskets will better protect against scratching.
Plastic labware can also be cleaned in an ultrasonic bath. However, direct contact with the acoustic membrane should be avoided.

Can I autoclave my volumetric plasticware?

The product description and/or specifications state whether or not the product can be autoclaved (note the temperature limits!). If the product is autoclavable, the recommended protocol is 20 minutes at 121°C (2 bar), according to DIN EN 285.
Prior to autoclaving plastic labware, ensure that no residual contamination remains on the item. Otherwise, the residual contamination will bake on solidly during the autoclaving process. Even substances that have no effect on the plastic at room temperature can have negative effects on the plastic during the autoclaving process, including persistant clouding. Additionally, microorganisms might not be killed effectively if they are protected by the residual contamination.

Notes on autoclaving:
  • Containers with screw tops or stoppers must be open during autoclaving to allow for pressure equalization - Autoclaving of a closed container will lead to the deformation or destruction of the container.
  • Plastic labware should be stood upright on a level surface during autoclaving to avoid shape deformation - Plastic labware should NOT be laid on its side during autoclaving.
  • No mechanical stresses should be present during autoclaving - For example, do not stack items.
  • Do not autoclave any container that contains residual contamination or even rinsing agent.
  • Some transparent plastics can absorb minute quantities of steam, which can lead to reversible clouding. This clouding disappears upon drying.

Tech Info & Warnings

Plastics Reference Chart

⚠ WARNING – These products can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, Di-n-butyl Phthalate (DBP), which is known to the State of California to cause birth defects or other reproductive harm, and Perfluorooctanoic Acid (PFOA), which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.

Literature

Catalog Page
VITLAB Custom Printing